BHP+68 hp (13%)
Standard
517 hp
Tuned
585 hp
Torque+80 Nm (10%)
Standard
830 Nm
Tuned
910 Nm
Suitability
Moderate (4.5/10)Gains Profile
Power-focusedHeadroom
MediumMercedes-Benz CL 600 517hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz CL 600 517hp? A Stage 1 remap can take this C216 - 2010 -> petrol engine from 517 BHP to 585 BHP and from 830 Nm to 910 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz CL can achieve.
How this engine compares
- 5thof 13 Mercedes-Benz CL engines by power gain
- 91%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz CL 600 517hp is a 5.5L naturally aspirated petrol engine producing 517 BHP and 830 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 585 BHP and 910 Nm — a gain of around 68 BHP (13%) and 80 Nm (10%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other CL C216 - 2010 -> Engines
| Engine |
|---|