BHP+30 hp (18%)
Standard
170 hp
Tuned
200 hp
Torque+70 Nm (20%)
Standard
350 Nm
Tuned
420 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumMercedes-Benz A 220 CDI 170hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz A 220 CDI 170hp? A Stage 1 remap can take this W176 - 2012 - 2015 diesel engine from 170 BHP to 200 BHP and from 350 Nm to 420 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz A can achieve.
How this engine compares
- 29thof 47 Mercedes-Benz A engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz A 220 CDI 170hp is a 2.1L turbocharged diesel engine producing 170 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 420 Nm — a gain of around 30 BHP (18%) and 70 Nm (20%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other A W176 - 2012 - 2015 Engines
| Engine | BHP | Gain |
|---|