BHP+13 hp (7%)
Standard
192 hp
Tuned
205 hp
Torque+14 Nm (5%)
Standard
256 Nm
Tuned
270 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowMazda 6 2.5 SkyActiv-G 192hp ECU Remapping
Considering an ECU remap for your Mazda 6 2.5 SkyActiv-G 192hp? A Stage 1 remap can take this 2013 - 2018 petrol engine from 192 BHP to 205 BHP and from 256 Nm to 270 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda 6 can achieve.
How this engine compares
- 18thof 25 Mazda 6 engines by power gain
- 8%of the 9,842 engines we hold gain data for see a smaller power increase
- 2%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mazda 6 2.5 SkyActiv-G 192hp is a 2.5L naturally aspirated petrol engine producing 192 BHP and 256 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 205 BHP and 270 Nm — a gain of around 13 BHP (7%) and 14 Nm (5%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 6 2013 - 2018 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|