BHP+25 hp (14%)
Standard
175 hp
Tuned
200 hp
Torque+40 Nm (10%)
Standard
420 Nm
Tuned
460 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumMazda 6 2.2 SkyActiv-D 175hp ECU Remapping
Considering an ECU remap for your Mazda 6 2.2 SkyActiv-D 175hp? A Stage 1 remap can take this 2013 - 2018 diesel engine from 175 BHP to 200 BHP and from 420 Nm to 460 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda 6 can achieve.
How this engine compares
- 14thof 25 Mazda 6 engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mazda 6 2.2 SkyActiv-D 175hp is a 2.2L turbocharged diesel engine producing 175 BHP and 420 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 460 Nm — a gain of around 25 BHP (14%) and 40 Nm (10%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other 6 2013 - 2018 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|