BHP+25 hp (17%)
Standard
150 hp
Tuned
175 hp
Torque+80 Nm (21%)
Standard
380 Nm
Tuned
460 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumMazda 3 2.2 SkyActiv-D 150hp ECU Remapping
Considering an ECU remap for your Mazda 3 2.2 SkyActiv-D 150hp? A Stage 1 remap can take this 2016 - 2018 diesel engine from 150 BHP to 175 BHP and from 380 Nm to 460 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda 3 can achieve.
How this engine compares
- 12thof 24 Mazda 3 engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mazda 3 2.2 SkyActiv-D 150hp is a 2.2L turbocharged diesel engine producing 150 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 175 BHP and 460 Nm — a gain of around 25 BHP (17%) and 80 Nm (21%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other 3 2016 - 2018 Engines
| Engine | BHP | Gain | Torque |
|---|