BHP+13 hp (13%)
Standard
100 hp
Tuned
113 hp
Torque+10 Nm (7%)
Standard
150 Nm
Tuned
160 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowMazda 3 1.5 Skyactiv-G 100hp ECU Remapping
Considering an ECU remap for your Mazda 3 1.5 Skyactiv-G 100hp? A Stage 1 remap can take this 2016 - 2018 petrol engine from 100 BHP to 113 BHP and from 150 Nm to 160 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda 3 can achieve.
How this engine compares
- 18thof 24 Mazda 3 engines by power gain
- 8%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mazda 3 1.5 Skyactiv-G 100hp is a 1.5L naturally aspirated petrol engine producing 100 BHP and 150 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 113 BHP and 160 Nm — a gain of around 13 BHP (13%) and 10 Nm (7%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 3 2016 - 2018 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|