BHP+35 hp (13%)
Standard
260 hp
Tuned
295 hp
Torque+70 Nm (18%)
Standard
380 Nm
Tuned
450 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumMazda 3 2.3 DISI Turbo MPS ECU Remapping
Considering an ECU remap for your Mazda 3 2.3 DISI Turbo MPS? A Stage 1 remap can take this 2009 - 2013 petrol engine from 260 BHP to 295 BHP and from 380 Nm to 450 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda 3 can achieve.
How this engine compares
- 5thof 24 Mazda 3 engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mazda 3 2.3 DISI Turbo MPS is a 2.3L turbocharged petrol engine producing 260 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 295 BHP and 450 Nm — a gain of around 35 BHP (13%) and 70 Nm (18%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.