BHP+50 hp (10%)
Standard
480 hp
Tuned
530 hp
Torque+400 Nm (18%)
Standard
2250 Nm
Tuned
2650 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumMAN TGM D2876 480hp ECU Remapping
Considering an ECU remap for your MAN TGM D2876 480hp? A Stage 1 remap can take this 1e generatie diesel engine from 480 BHP to 530 BHP and from 2250 Nm to 2650 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your MAN TGM can achieve.
How this engine compares
- 11thof 18 MAN TGM engines by power gain
- 76%of the 9,842 engines we hold gain data for see a smaller power increase
- 99%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The MAN TGM D2876 480hp is a turbocharged diesel engine producing 480 BHP and 2250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 530 BHP and 2650 Nm — a gain of around 50 BHP (10%) and 400 Nm (18%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other TGM 1e generatie Engines
| Engine | BHP | Gain |
|---|