BHP+64 hp (20%)
Standard
326 hp
Tuned
390 hp
Torque+280 Nm (22%)
Standard
1250 Nm
Tuned
1530 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighMAN TGM 26-330 326hp ECU Remapping
Considering an ECU remap for your MAN TGM 26-330 326hp? A Stage 1 remap can take this 1e generatie diesel engine from 326 BHP to 390 BHP and from 1250 Nm to 1530 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your MAN TGM can achieve.
How this engine compares
- 10thof 18 MAN TGM engines by power gain
- 89%of the 9,842 engines we hold gain data for see a smaller power increase
- 97%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The MAN TGM 26-330 326hp is a turbocharged diesel engine producing 326 BHP and 1250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 390 BHP and 1530 Nm — a gain of around 64 BHP (20%) and 280 Nm (22%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other TGM 1e generatie Engines
| Engine | BHP | Gain | Torque |
|---|