Mack MP7 395C - US04 - 10.8 401hp Remap
Expected gains of +59 BHP and +136 Nm torque
Get Your Free Quote ↓BHP+59 hp (15%)
Standard
401 hp
Tuned
460 hp
Torque+136 Nm (6%)
Standard
2114 Nm
Tuned
2250 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumMack MP7 395C - US04 - 10.8 401hp ECU Remapping
Considering an ECU remap for your Mack MP7 395C - US04 - 10.8 401hp? A Stage 1 remap can take this All diesel engine from 401 BHP to 460 BHP and from 2114 Nm to 2250 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mack MP7 can achieve.
How this engine compares
- 4thof 9 Mack MP7 engines by power gain
- 85%of the 9,842 engines we hold gain data for see a smaller power increase
- 91%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mack MP7 395C - US04 - 10.8 401hp is a turbocharged diesel engine producing 401 BHP and 2114 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 460 BHP and 2250 Nm — a gain of around 59 BHP (15%) and 136 Nm (6%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other MP7 All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|