Mack MP7 325M - US07 - 10.8 329hp Remap
Expected gains of +56 BHP and +54 Nm torque
Get Your Free Quote ↓BHP+56 hp (17%)
Standard
329 hp
Tuned
385 hp
Torque+54 Nm (4%)
Standard
1266 Nm
Tuned
1320 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumMack MP7 325M - US07 - 10.8 329hp ECU Remapping
Considering an ECU remap for your Mack MP7 325M - US07 - 10.8 329hp? A Stage 1 remap can take this All diesel engine from 329 BHP to 385 BHP and from 1266 Nm to 1320 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mack MP7 can achieve.
How this engine compares
- 5thof 9 Mack MP7 engines by power gain
- 84%of the 9,842 engines we hold gain data for see a smaller power increase
- 38%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mack MP7 325M - US07 - 10.8 329hp is a turbocharged diesel engine producing 329 BHP and 1266 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 385 BHP and 1320 Nm — a gain of around 56 BHP (17%) and 54 Nm (4%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other MP7 All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|