Mack MP10 565 - US07 - 16.1 564hp Remap
Expected gains of +46 BHP and +225 Nm torque
Get Your Free Quote ↓BHP+46 hp (8%)
Standard
564 hp
Tuned
610 hp
Torque+225 Nm (8%)
Standard
2675 Nm
Tuned
2900 Nm
Suitability
Moderate (5.5/10)Gains Profile
BalancedHeadroom
LowMack MP10 565 - US07 - 16.1 564hp ECU Remapping
Considering an ECU remap for your Mack MP10 565 - US07 - 16.1 564hp? A Stage 1 remap can take this All diesel engine from 564 BHP to 610 BHP and from 2675 Nm to 2900 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mack MP10 can achieve.
How this engine compares
- 2ndof 3 Mack MP10 engines by power gain
- 74%of the 9,842 engines we hold gain data for see a smaller power increase
- 96%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mack MP10 565 - US07 - 16.1 564hp is a turbocharged diesel engine producing 564 BHP and 2675 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 610 BHP and 2900 Nm — a gain of around 46 BHP (8%) and 225 Nm (8%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other MP10 All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|