Mack MP10 515 - US07 - 16.1 515hp Remap
Expected gains of +45 BHP and +142 Nm torque
Get Your Free Quote ↓BHP+45 hp (9%)
Standard
515 hp
Tuned
560 hp
Torque+142 Nm (6%)
Standard
2380 Nm
Tuned
2522 Nm
Suitability
Moderate (5.5/10)Gains Profile
Limited headroomHeadroom
LowMack MP10 515 - US07 - 16.1 515hp ECU Remapping
Considering an ECU remap for your Mack MP10 515 - US07 - 16.1 515hp? A Stage 1 remap can take this All diesel engine from 515 BHP to 560 BHP and from 2380 Nm to 2522 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mack MP10 can achieve.
How this engine compares
- 3rdof 3 Mack MP10 engines by power gain
- 71%of the 9,842 engines we hold gain data for see a smaller power increase
- 92%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mack MP10 515 - US07 - 16.1 515hp is a turbocharged diesel engine producing 515 BHP and 2380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 560 BHP and 2522 Nm — a gain of around 45 BHP (9%) and 142 Nm (6%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other MP10 All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|