BHP+8 hp (13%)
Standard
60 hp
Tuned
68 hp
Torque+10 Nm (10%)
Standard
102 Nm
Tuned
112 Nm
Suitability
Moderate (4.5/10)Gains Profile
Power-focusedHeadroom
MediumLancia Ypsilon 1.2i 8V 60hp ECU Remapping
Considering an ECU remap for your Lancia Ypsilon 1.2i 8V 60hp? A Stage 1 remap can take this 2004 - 2011 petrol engine from 60 BHP to 68 BHP and from 102 Nm to 112 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lancia Ypsilon can achieve.
How this engine compares
- 11thof 13 Lancia Ypsilon engines by power gain
- 1%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Lancia Ypsilon 1.2i 8V 60hp is a 1.2L naturally aspirated petrol engine producing 60 BHP and 102 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 68 BHP and 112 Nm — a gain of around 8 BHP (13%) and 10 Nm (10%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Ypsilon 2004 - 2011 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|