BHP+8 hp (10%)
Standard
80 hp
Tuned
88 hp
Torque+11 Nm (10%)
Standard
114 Nm
Tuned
125 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowLancia Ypsilon 1.2i 16v 80hp ECU Remapping
Considering an ECU remap for your Lancia Ypsilon 1.2i 16v 80hp? A Stage 1 remap can take this 2004 - 2011 petrol engine from 80 BHP to 88 BHP and from 114 Nm to 125 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lancia Ypsilon can achieve.
How this engine compares
- 11thof 13 Lancia Ypsilon engines by power gain
- 1%of the 9,842 engines we hold gain data for see a smaller power increase
- 1%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Lancia Ypsilon 1.2i 16v 80hp is a 1.2L naturally aspirated petrol engine producing 80 BHP and 114 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 88 BHP and 125 Nm — a gain of around 8 BHP (10%) and 11 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Ypsilon 2004 - 2011 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|