BHP+25 hp (15%)
Standard
170 hp
Tuned
195 hp
Torque+65 Nm (18%)
Standard
370 Nm
Tuned
435 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumLancia Phedra 2.2 JTDm 170hp ECU Remapping
Considering an ECU remap for your Lancia Phedra 2.2 JTDm 170hp? A Stage 1 remap can take this All diesel engine from 170 BHP to 195 BHP and from 370 Nm to 435 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lancia Phedra can achieve.
How this engine compares
- 4thof 5 Lancia Phedra engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 52%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Lancia Phedra 2.2 JTDm 170hp is a 2.2L turbocharged diesel engine producing 170 BHP and 370 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 435 Nm — a gain of around 25 BHP (15%) and 65 Nm (18%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Phedra All Engines
| Engine | BHP | Gain | Torque |
|---|