BHP+16 hp (9%)
Standard
184 hp
Tuned
200 hp
Torque+58 Nm (15%)
Standard
392 Nm
Tuned
450 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumKia Sportage 2.0 CRDi 184hp ECU Remapping
Considering an ECU remap for your Kia Sportage 2.0 CRDi 184hp? A Stage 1 remap can take this 2016 - 2018 diesel engine from 184 BHP to 200 BHP and from 392 Nm to 450 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Sportage can achieve.
How this engine compares
- 16thof 21 Kia Sportage engines by power gain
- 12%of the 9,842 engines we hold gain data for see a smaller power increase
- 40%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Sportage 2.0 CRDi 184hp is a 2.0L turbocharged diesel engine producing 184 BHP and 392 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 450 Nm — a gain of around 16 BHP (9%) and 58 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Sportage 2016 - 2018 Engines
| Engine | BHP | Gain |
|---|