BHP+39 hp (29%)
Standard
136 hp
Tuned
175 hp
Torque+57 Nm (15%)
Standard
373 Nm
Tuned
430 Nm
Suitability
Good (7.5/10)Gains Profile
Power-focusedHeadroom
HighKia Sportage 2.0 CRDi 136hp ECU Remapping
Considering an ECU remap for your Kia Sportage 2.0 CRDi 136hp? A Stage 1 remap can take this 2016 - 2018 diesel engine from 136 BHP to 175 BHP and from 373 Nm to 430 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Sportage can achieve.
How this engine compares
- 2ndof 21 Kia Sportage engines by power gain
- 62%of the 9,842 engines we hold gain data for see a smaller power increase
- 40%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Sportage 2.0 CRDi 136hp is a 2.0L turbocharged diesel engine producing 136 BHP and 373 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 175 BHP and 430 Nm — a gain of around 39 BHP (29%) and 57 Nm (15%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Sportage 2016 - 2018 Engines
| Engine | BHP | Gain | Torque |
|---|