BHP+11 hp (10%)
Standard
109 hp
Tuned
120 hp
Torque+13 Nm (9%)
Standard
137 Nm
Tuned
150 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowKia Rio 1.4i 16V 109hp ECU Remapping
Considering an ECU remap for your Kia Rio 1.4i 16V 109hp? A Stage 1 remap can take this 2011 - 2014 petrol engine from 109 BHP to 120 BHP and from 137 Nm to 150 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Rio can achieve.
How this engine compares
- 11thof 12 Kia Rio engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 2%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Rio 1.4i 16V 109hp is a 1.4L naturally aspirated petrol engine producing 109 BHP and 137 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 120 BHP and 150 Nm — a gain of around 11 BHP (10%) and 13 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Rio 2011 - 2014 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|