BHP+11 hp (13%)
Standard
86 hp
Tuned
97 hp
Torque+22 Nm (18%)
Standard
121 Nm
Tuned
143 Nm
Suitability
Moderate (5.5/10)Gains Profile
Torque-focusedHeadroom
MediumKia Rio 1.2 CVVT 86hp ECU Remapping
Considering an ECU remap for your Kia Rio 1.2 CVVT 86hp? A Stage 1 remap can take this 2011 - 2014 petrol engine from 86 BHP to 97 BHP and from 121 Nm to 143 Nm of torque (naturally aspirated). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Rio can achieve.
How this engine compares
- 11thof 12 Kia Rio engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Rio 1.2 CVVT 86hp is a 1.2L naturally aspirated petrol engine producing 86 BHP and 121 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 97 BHP and 143 Nm — a gain of around 11 BHP (13%) and 22 Nm (18%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Rio 2011 - 2014 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|