BHP+21 hp (8%)
Standard
274 hp
Tuned
295 hp
Torque+30 Nm (8%)
Standard
369 Nm
Tuned
399 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowKia Mohave 3.8 24v V6 274hp ECU Remapping
Considering an ECU remap for your Kia Mohave 3.8 24v V6 274hp? A Stage 1 remap can take this All petrol engine from 274 BHP to 295 BHP and from 369 Nm to 399 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Mohave can achieve.
How this engine compares
- 2ndof 2 Kia Mohave engines by power gain
- 24%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Mohave 3.8 24v V6 274hp is a 3.8L naturally aspirated petrol engine producing 274 BHP and 369 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 295 BHP and 399 Nm — a gain of around 21 BHP (8%) and 30 Nm (8%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Mohave All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|