BHP+40 hp (16%)
Standard
250 hp
Tuned
290 hp
Torque+80 Nm (15%)
Standard
540 Nm
Tuned
620 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumKia Mohave 3.0 CRDI 250hp ECU Remapping
Considering an ECU remap for your Kia Mohave 3.0 CRDI 250hp? A Stage 1 remap can take this All diesel engine from 250 BHP to 290 BHP and from 540 Nm to 620 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Mohave can achieve.
How this engine compares
- 1stof 2 Kia Mohave engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Mohave 3.0 CRDI 250hp is a 3.0L turbocharged diesel engine producing 250 BHP and 540 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 290 BHP and 620 Nm — a gain of around 40 BHP (16%) and 80 Nm (15%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Mohave All Engines
| Engine | BHP | Gain | Torque |
|---|