BHP+22 hp (13%)
Standard
166 hp
Tuned
188 hp
Torque+26 Nm (11%)
Standard
246 Nm
Tuned
272 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumKia K7 2.7 V6 166hp ECU Remapping
Considering an ECU remap for your Kia K7 2.7 V6 166hp? A Stage 1 remap can take this 2010 - 2016 petrol engine from 166 BHP to 188 BHP and from 246 Nm to 272 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia K7 can achieve.
How this engine compares
- 2ndof 6 Kia K7 engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia K7 2.7 V6 166hp is a 2.7L naturally aspirated petrol engine producing 166 BHP and 246 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 188 BHP and 272 Nm — a gain of around 22 BHP (13%) and 26 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other K7 2010 - 2016 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|