BHP+19 hp (10%)
Standard
181 hp
Tuned
200 hp
Torque+23 Nm (10%)
Standard
231 Nm
Tuned
254 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumKia K7 2.4i 181hp ECU Remapping
Considering an ECU remap for your Kia K7 2.4i 181hp? A Stage 1 remap can take this 2010 - 2016 petrol engine from 181 BHP to 200 BHP and from 231 Nm to 254 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia K7 can achieve.
How this engine compares
- 5thof 6 Kia K7 engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 13%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia K7 2.4i 181hp is a 2.4L naturally aspirated petrol engine producing 181 BHP and 231 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 254 Nm — a gain of around 19 BHP (10%) and 23 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other K7 2010 - 2016 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|