BHP+35 hp (18%)
Standard
200 hp
Tuned
235 hp
Torque+60 Nm (13%)
Standard
460 Nm
Tuned
520 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumJeep Wrangler 2.8 CRDi 200hp ECU Remapping
Considering an ECU remap for your Jeep Wrangler 2.8 CRDi 200hp? A Stage 1 remap can take this 2017 -> diesel engine from 200 BHP to 235 BHP and from 460 Nm to 520 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Wrangler can achieve.
How this engine compares
- 1stof 11 Jeep Wrangler engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Jeep Wrangler 2.8 CRDi 200hp is a 2.8L turbocharged diesel engine producing 200 BHP and 460 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 235 BHP and 520 Nm — a gain of around 35 BHP (18%) and 60 Nm (13%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Wrangler 2017 -> Engines
| Engine | BHP | Gain | Torque |
|---|