BHP+25 hp (7%)
Standard
380 hp
Tuned
405 hp
Torque+63 Nm (10%)
Standard
637 Nm
Tuned
700 Nm
Suitability
Moderate (5.5/10)Gains Profile
Torque-focusedHeadroom
LowJeep Wrangler 2.0T 4xe 380hp ECU Remapping
Considering an ECU remap for your Jeep Wrangler 2.0T 4xe 380hp? A Stage 1 remap can take this 2017 -> petrol engine from 380 BHP to 405 BHP and from 637 Nm to 700 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Wrangler can achieve.
How this engine compares
- 6thof 11 Jeep Wrangler engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 52%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Jeep Wrangler 2.0T 4xe 380hp is a 2.0L turbocharged petrol engine producing 380 BHP and 637 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 405 BHP and 700 Nm — a gain of around 25 BHP (7%) and 63 Nm (10%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.