BHP+20 hp (7%)
Standard
305 hp
Tuned
325 hp
Torque+22 Nm (5%)
Standard
453 Nm
Tuned
475 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowJeep Commander 4.7 V8 305hp ECU Remapping
Considering an ECU remap for your Jeep Commander 4.7 V8 305hp? A Stage 1 remap can take this 2006 - 2010 petrol engine from 305 BHP to 325 BHP and from 453 Nm to 475 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Commander can achieve.
How this engine compares
- 5thof 9 Jeep Commander engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Jeep Commander 4.7 V8 305hp is a 4.7L naturally aspirated petrol engine producing 305 BHP and 453 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 325 BHP and 475 Nm — a gain of around 20 BHP (7%) and 22 Nm (5%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other Commander 2006 - 2010 Engines
| Engine |
|---|