BHP+10 hp (5%)
Standard
200 hp
Tuned
210 hp
Torque+60 Nm (14%)
Standard
440 Nm
Tuned
500 Nm
Suitability
Moderate (5.5/10)Gains Profile
Torque-focusedHeadroom
LowJeep Cherokee 2.2 CRD 200hp ECU Remapping
Considering an ECU remap for your Jeep Cherokee 2.2 CRD 200hp? A Stage 1 remap can take this 2014 -> diesel engine from 200 BHP to 210 BHP and from 440 Nm to 500 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Cherokee can achieve.
How this engine compares
- 15thof 15 Jeep Cherokee engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Jeep Cherokee 2.2 CRD 200hp is a 2.2L turbocharged diesel engine producing 200 BHP and 440 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 500 Nm — a gain of around 10 BHP (5%) and 60 Nm (14%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Cherokee 2014 -> Engines
| Engine | BHP | Gain |
|---|