BHP+30 hp (18%)
Standard
170 hp
Tuned
200 hp
Torque+75 Nm (21%)
Standard
350 Nm
Tuned
425 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumJeep Cherokee 2.0 CRD 170hp ECU Remapping
Considering an ECU remap for your Jeep Cherokee 2.0 CRD 170hp? A Stage 1 remap can take this 2014 -> diesel engine from 170 BHP to 200 BHP and from 350 Nm to 425 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Cherokee can achieve.
How this engine compares
- 7thof 15 Jeep Cherokee engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 63%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Jeep Cherokee 2.0 CRD 170hp is a 2.0L turbocharged diesel engine producing 170 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 425 Nm — a gain of around 30 BHP (18%) and 75 Nm (21%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Cherokee 2014 -> Engines
| Engine | BHP | Gain |
|---|