BHP+61 hp (20%)
Standard
299 hp
Tuned
360 hp
Torque+260 Nm (25%)
Standard
1050 Nm
Tuned
1310 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighIveco EuroCargo 299hp ECU Remapping
Considering an ECU remap for your Iveco EuroCargo 299hp? A Stage 1 remap can take this All diesel engine from 299 BHP to 360 BHP and from 1050 Nm to 1310 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco EuroCargo can achieve.
How this engine compares
- 2ndof 14 Iveco EuroCargo engines by power gain
- 88%of the 9,842 engines we hold gain data for see a smaller power increase
- 96%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Iveco EuroCargo 299hp is a turbocharged diesel engine producing 299 BHP and 1050 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 360 BHP and 1310 Nm — a gain of around 61 BHP (20%) and 260 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other EuroCargo All Engines
| Engine | BHP | Gain | Torque |
|---|