BHP+56 hp (20%)
Standard
279 hp
Tuned
335 hp
Torque+220 Nm (23%)
Standard
950 Nm
Tuned
1170 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighIveco EuroCargo 279hp ECU Remapping
Considering an ECU remap for your Iveco EuroCargo 279hp? A Stage 1 remap can take this All diesel engine from 279 BHP to 335 BHP and from 950 Nm to 1170 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco EuroCargo can achieve.
How this engine compares
- 3rdof 14 Iveco EuroCargo engines by power gain
- 84%of the 9,842 engines we hold gain data for see a smaller power increase
- 95%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Iveco EuroCargo 279hp is a turbocharged diesel engine producing 279 BHP and 950 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 335 BHP and 1170 Nm — a gain of around 56 BHP (20%) and 220 Nm (23%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other EuroCargo All Engines
| Engine | BHP | Gain | Torque |
|---|