BHP+24 hp (14%)
Standard
176 hp
Tuned
200 hp
Torque+80 Nm (21%)
Standard
380 Nm
Tuned
460 Nm
Suitability
Good (7/10)Gains Profile
Torque-focusedHeadroom
MediumIveco Daily 3.0 HPT 176hp ECU Remapping
Considering an ECU remap for your Iveco Daily 3.0 HPT 176hp? A Stage 1 remap can take this -> 2016 diesel engine from 176 BHP to 200 BHP and from 380 Nm to 460 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco Daily can achieve.
How this engine compares
- 18thof 19 Iveco Daily engines by power gain
- 27%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Iveco Daily 3.0 HPT 176hp is a 3.0L turbocharged diesel engine producing 176 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 460 Nm — a gain of around 24 BHP (14%) and 80 Nm (21%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Daily -> 2016 Engines
| Engine | BHP | Gain |
|---|