BHP+34 hp (23%)
Standard
146 hp
Tuned
180 hp
Torque+70 Nm (21%)
Standard
340 Nm
Tuned
410 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighIveco Daily 3.0 HPI 146hp ECU Remapping
Considering an ECU remap for your Iveco Daily 3.0 HPI 146hp? A Stage 1 remap can take this -> 2016 diesel engine from 146 BHP to 180 BHP and from 340 Nm to 410 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco Daily can achieve.
How this engine compares
- 9thof 19 Iveco Daily engines by power gain
- 53%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Iveco Daily 3.0 HPI 146hp is a 3.0L turbocharged diesel engine producing 146 BHP and 340 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 410 Nm — a gain of around 34 BHP (23%) and 70 Nm (21%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Daily -> 2016 Engines
| Engine | BHP | Gain | Torque |
|---|