Hyundai Palisade 3.8 GDI V6 295hp Remap
Expected gains of +15 BHP and +25 Nm torque
Get Your Free Quote ↓BHP+15 hp (5%)
Standard
295 hp
Tuned
310 hp
Torque+25 Nm (7%)
Standard
355 Nm
Tuned
380 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowHyundai Palisade 3.8 GDI V6 295hp ECU Remapping
Considering an ECU remap for your Hyundai Palisade 3.8 GDI V6 295hp? A Stage 1 remap can take this 2019 -> petrol engine from 295 BHP to 310 BHP and from 355 Nm to 380 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Palisade can achieve.
How this engine compares
- 3rdof 3 Hyundai Palisade engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Hyundai Palisade 3.8 GDI V6 295hp is a 3.8L naturally aspirated petrol engine producing 295 BHP and 355 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 310 BHP and 380 Nm — a gain of around 15 BHP (5%) and 25 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Palisade 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|