Hyundai Palisade 2.2 CRDi 193hp Remap
Expected gains of +27 BHP and +39 Nm torque
Get Your Free Quote ↓BHP+27 hp (14%)
Standard
193 hp
Tuned
220 hp
Torque+39 Nm (9%)
Standard
441 Nm
Tuned
480 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumHyundai Palisade 2.2 CRDi 193hp ECU Remapping
Considering an ECU remap for your Hyundai Palisade 2.2 CRDi 193hp? A Stage 1 remap can take this 2019 -> diesel engine from 193 BHP to 220 BHP and from 441 Nm to 480 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Palisade can achieve.
How this engine compares
- 1stof 3 Hyundai Palisade engines by power gain
- 35%of the 9,842 engines we hold gain data for see a smaller power increase
- 20%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Hyundai Palisade 2.2 CRDi 193hp is a 2.2L turbocharged diesel engine producing 193 BHP and 441 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 220 BHP and 480 Nm — a gain of around 27 BHP (14%) and 39 Nm (9%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Palisade 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|