BHP+24 hp (18%)
Standard
136 hp
Tuned
160 hp
Torque+50 Nm (18%)
Standard
280 Nm
Tuned
330 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumHyundai i30 1.6 CRDi 136hp ECU Remapping
Considering an ECU remap for your Hyundai i30 1.6 CRDi 136hp? A Stage 1 remap can take this 2017 - 2020 diesel engine from 136 BHP to 160 BHP and from 280 Nm to 330 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai i30 can achieve.
How this engine compares
- 21stof 26 Hyundai i30 engines by power gain
- 27%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Hyundai i30 1.6 CRDi 136hp is a 1.6L turbocharged diesel engine producing 136 BHP and 280 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 330 Nm — a gain of around 24 BHP (18%) and 50 Nm (18%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other i30 2017 - 2020 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 CRDi 95hp | 95 → 145 |