BHP+35 hp (32%)
Standard
110 hp
Tuned
145 hp
Torque+50 Nm (19%)
Standard
270 Nm
Tuned
320 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighHyundai i30 1.6 CRDi 110hp ECU Remapping
Considering an ECU remap for your Hyundai i30 1.6 CRDi 110hp? A Stage 1 remap can take this 2017 - 2020 diesel engine from 110 BHP to 145 BHP and from 270 Nm to 320 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai i30 can achieve.
How this engine compares
- 8thof 26 Hyundai i30 engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Hyundai i30 1.6 CRDi 110hp is a 1.6L turbocharged diesel engine producing 110 BHP and 270 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 320 Nm — a gain of around 35 BHP (32%) and 50 Nm (19%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other i30 2017 - 2020 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 CRDi 95hp | 95 → 145 | +50 |