BHP+20 hp (9%)
Standard
220 hp
Tuned
240 hp
Torque+25 Nm (8%)
Standard
305 Nm
Tuned
330 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowGMC Canyon 3.5 V6 220hp ECU Remapping
Considering an ECU remap for your GMC Canyon 3.5 V6 220hp? A Stage 1 remap can take this 2003 - 2012 petrol engine from 220 BHP to 240 BHP and from 305 Nm to 330 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your GMC Canyon can achieve.
How this engine compares
- 4thof 7 GMC Canyon engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The GMC Canyon 3.5 V6 220hp is a 3.5L naturally aspirated petrol engine producing 220 BHP and 305 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 240 BHP and 330 Nm — a gain of around 20 BHP (9%) and 25 Nm (8%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Canyon 2003 - 2012 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|