BHP+20 hp (11%)
Standard
175 hp
Tuned
195 hp
Torque+19 Nm (8%)
Standard
251 Nm
Tuned
270 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowGMC Canyon 2.8i 175hp ECU Remapping
Considering an ECU remap for your GMC Canyon 2.8i 175hp? A Stage 1 remap can take this 2003 - 2012 petrol engine from 175 BHP to 195 BHP and from 251 Nm to 270 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your GMC Canyon can achieve.
How this engine compares
- 4thof 7 GMC Canyon engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The GMC Canyon 2.8i 175hp is a 2.8L naturally aspirated petrol engine producing 175 BHP and 251 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 270 Nm — a gain of around 20 BHP (11%) and 19 Nm (8%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Canyon 2003 - 2012 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|