BHP+22 hp (8%)
Standard
263 hp
Tuned
285 hp
Torque+22 Nm (7%)
Standard
338 Nm
Tuned
360 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowFord Taurus 3.5 V6 263hp ECU Remapping
Considering an ECU remap for your Ford Taurus 3.5 V6 263hp? A Stage 1 remap can take this All petrol engine from 263 BHP to 285 BHP and from 338 Nm to 360 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Taurus can achieve.
How this engine compares
- 5thof 6 Ford Taurus engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Taurus 3.5 V6 263hp is a 3.5L naturally aspirated petrol engine producing 263 BHP and 338 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 285 BHP and 360 Nm — a gain of around 22 BHP (8%) and 22 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Taurus All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|