BHP+30 hp (25%)
Standard
120 hp
Tuned
150 hp
Torque+80 Nm (30%)
Standard
270 Nm
Tuned
350 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighFord Mondeo 1.5 TDCi 120hp ECU Remapping
Considering an ECU remap for your Ford Mondeo 1.5 TDCi 120hp? A Stage 1 remap can take this 2015 - 2018 diesel engine from 120 BHP to 150 BHP and from 270 Nm to 350 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Mondeo can achieve.
How this engine compares
- 17thof 45 Ford Mondeo engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Mondeo 1.5 TDCi 120hp is a 1.5L turbocharged diesel engine producing 120 BHP and 270 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 150 BHP and 350 Nm — a gain of around 30 BHP (25%) and 80 Nm (30%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Mondeo 2015 - 2018 Engines
| Engine | BHP | Gain |
|---|