BHP+20 hp (11%)
Standard
180 hp
Tuned
200 hp
Torque+50 Nm (13%)
Standard
400 Nm
Tuned
450 Nm
Suitability
Good (6.5/10)Gains Profile
BalancedHeadroom
MediumFord Kuga 2.0 TDCi 180hp ECU Remapping
Considering an ECU remap for your Ford Kuga 2.0 TDCi 180hp? A Stage 1 remap can take this 2013 - 2016 diesel engine from 180 BHP to 200 BHP and from 400 Nm to 450 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Kuga can achieve.
How this engine compares
- 26thof 31 Ford Kuga engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Kuga 2.0 TDCi 180hp is a 2.0L turbocharged diesel engine producing 180 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 450 Nm — a gain of around 20 BHP (11%) and 50 Nm (12%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Kuga 2013 - 2016 Engines
| Engine | BHP | Gain | Torque |
|---|