BHP+25 hp (26%)
Standard
95 hp
Tuned
120 hp
Torque+70 Nm (35%)
Standard
200 Nm
Tuned
270 Nm
Suitability
Excellent (8.5/10)Gains Profile
Torque-focusedHeadroom
HighFord Kuga 1.6 TDCi 95hp ECU Remapping
Considering an ECU remap for your Ford Kuga 1.6 TDCi 95hp? A Stage 1 remap can take this 2013 - 2016 diesel engine from 95 BHP to 120 BHP and from 200 Nm to 270 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Kuga can achieve.
How this engine compares
- 22ndof 31 Ford Kuga engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Kuga 1.6 TDCi 95hp is a 1.6L turbocharged diesel engine producing 95 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 120 BHP and 270 Nm — a gain of around 25 BHP (26%) and 70 Nm (35%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Kuga 2013 - 2016 Engines
| Engine | BHP | Gain |
|---|