BHP+10 hp (11%)
Standard
95 hp
Tuned
105 hp
Torque+15 Nm (11%)
Standard
135 Nm
Tuned
150 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumFord Ka 1.6i 16v 95hp ECU Remapping
Considering an ECU remap for your Ford Ka 1.6i 16v 95hp? A Stage 1 remap can take this 1997 - 2008 petrol engine from 95 BHP to 105 BHP and from 135 Nm to 150 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Ka can achieve.
How this engine compares
- 3rdof 6 Ford Ka engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Ka 1.6i 16v 95hp is a 1.6L naturally aspirated petrol engine producing 95 BHP and 135 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 105 BHP and 150 Nm — a gain of around 10 BHP (11%) and 15 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Ka 1997 - 2008 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|