BHP+6 hp (9%)
Standard
70 hp
Tuned
76 hp
Torque+12 Nm (11%)
Standard
106 Nm
Tuned
118 Nm
Suitability
Moderate (4/10)Gains Profile
Torque-focusedHeadroom
LowFord Ka 1.3i 8v 70hp ECU Remapping
Considering an ECU remap for your Ford Ka 1.3i 8v 70hp? A Stage 1 remap can take this 1997 - 2008 petrol engine from 70 BHP to 76 BHP and from 106 Nm to 118 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Ka can achieve.
How this engine compares
- 4thof 6 Ford Ka engines by power gain
- 0%of the 9,842 engines we hold gain data for see a smaller power increase
- 1%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Ka 1.3i 8v 70hp is a 1.3L naturally aspirated petrol engine producing 70 BHP and 106 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 76 BHP and 118 Nm — a gain of around 6 BHP (9%) and 12 Nm (11%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Ka 1997 - 2008 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|