BHP+19 hp (9%)
Standard
201 hp
Tuned
220 hp
Torque+23 Nm (6%)
Standard
357 Nm
Tuned
380 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowFord Freestar 4.2 V6 201hp ECU Remapping
Considering an ECU remap for your Ford Freestar 4.2 V6 201hp? A Stage 1 remap can take this 2004 - 2007 petrol engine from 201 BHP to 220 BHP and from 357 Nm to 380 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Freestar can achieve.
How this engine compares
- 2ndof 2 Ford Freestar engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 13%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Freestar 4.2 V6 201hp is a 4.2L naturally aspirated petrol engine producing 201 BHP and 357 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 220 BHP and 380 Nm — a gain of around 19 BHP (9%) and 23 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Freestar 2004 - 2007 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|