BHP+20 hp (10%)
Standard
195 hp
Tuned
215 hp
Torque+30 Nm (9%)
Standard
325 Nm
Tuned
355 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowFord Freestar 3.9 V6 195hp ECU Remapping
Considering an ECU remap for your Ford Freestar 3.9 V6 195hp? A Stage 1 remap can take this 2004 - 2007 petrol engine from 195 BHP to 215 BHP and from 325 Nm to 355 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Freestar can achieve.
How this engine compares
- 1stof 2 Ford Freestar engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Freestar 3.9 V6 195hp is a 3.9L naturally aspirated petrol engine producing 195 BHP and 325 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 215 BHP and 355 Nm — a gain of around 20 BHP (10%) and 30 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Freestar 2004 - 2007 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|