BHP+10 hp (8%)
Standard
125 hp
Tuned
135 hp
Torque+15 Nm (9%)
Standard
160 Nm
Tuned
175 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowFord Focus 1.6 Ti-VCT 125hp ECU Remapping
Considering an ECU remap for your Ford Focus 1.6 Ti-VCT 125hp? A Stage 1 remap can take this 2011 - 2014 petrol engine from 125 BHP to 135 BHP and from 160 Nm to 175 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Focus can achieve.
How this engine compares
- 48thof 61 Ford Focus engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Focus 1.6 Ti-VCT 125hp is a 1.6L naturally aspirated petrol engine producing 125 BHP and 160 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 135 BHP and 175 Nm — a gain of around 10 BHP (8%) and 15 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Focus 2011 - 2014 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|