Ford Fiesta 1.0 EcoBoost 140hp Remap
Expected gains of +10 BHP and +50 Nm torque
Get Your Free Quote ↓BHP+10 hp (7%)
Standard
140 hp
Tuned
150 hp
Torque+50 Nm (25%)
Standard
200 Nm
Tuned
250 Nm
Suitability
Good (7/10)Gains Profile
Torque-focusedHeadroom
MediumFord Fiesta 1.0 EcoBoost 140hp ECU Remapping
Considering an ECU remap for your Ford Fiesta 1.0 EcoBoost 140hp? A Stage 1 remap can take this Mk7 - 2013 - 2017 petrol engine from 140 BHP to 150 BHP and from 200 Nm to 250 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Fiesta can achieve.
How this engine compares
- 31stof 40 Ford Fiesta engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Fiesta 1.0 EcoBoost 140hp is a 1.0L turbocharged petrol engine producing 140 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 150 BHP and 250 Nm — a gain of around 10 BHP (7%) and 50 Nm (25%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other Fiesta Mk7 - 2013 - 2017 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|