BHP+7 hp (12%)
Standard
60 hp
Tuned
67 hp
Torque+10 Nm (10%)
Standard
102 Nm
Tuned
112 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumFiat Punto 1.2i 8v 60hp ECU Remapping
Considering an ECU remap for your Fiat Punto 1.2i 8v 60hp? A Stage 1 remap can take this 2003-> petrol engine from 60 BHP to 67 BHP and from 102 Nm to 112 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Punto can achieve.
How this engine compares
- 15thof 17 Fiat Punto engines by power gain
- 1%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Punto 1.2i 8v 60hp is a 1.2L naturally aspirated petrol engine producing 60 BHP and 102 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 67 BHP and 112 Nm — a gain of around 7 BHP (12%) and 10 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Punto 2003-> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|